linux中如何关闭icmp redirect

Life is short , play more!
本文来自lihao's Blog,转载请注明。

1. /sbin/sysctl 运行时候改变内河参数

Server# /sbin/sysctl -w net.ipv4.conf.all.accept_redirects = 0
Server# /sbin/sysctl -w net.ipv4.conf.all.send_redirects = 0

Server# /sbin/sysctl -w net.ipv6.conf.all.accept_redirects = 0
Server# /sbin/sysctl -w net.ipv6.conf.all.send_redirects = 0

针对特定的网卡设定

Server# /sbin/sysctl -w net.ipv4.conf.eth0.accept_redirects = 0
Server# /sbin/sysctl -w net.ipv4.conf.eth0.send_redirects = 0

Server# /sbin/sysctl -w net.ipv6.conf.eth0.accept_redirects = 0
Server# /sbin/sysctl -w net.ipv6.conf.eth0.send_redirects = 0

2. Edit the /etc/sysctl.conf ,  重起后使设置生效

Edit the /etc/sysctl.conf file and 添加如下几行, 不含[]内内容.

net.ipv4.conf.all.accept_redirects = 0 [for IPv4]
net.ipv4.conf.all.send_redirects = 0 [for IPv4]

net.ipv6.conf.all.accept_redirects = 0 [for IPv6]
net.ipv6.conf.all.send_redirects = 0 [for IPv6]

Again, if you want to control ICMP redirects on a per interface basis then add the following lines (say for eth0):

net.ipv4.conf.eth0.accept_redirects = 0 [for IPv4]
net.ipv4.conf.eth0.send_redirects = 0 [for IPv4]

net.ipv6.conf.eth0.accept_redirects = 0 [for IPv6]
net.ipv6.conf.eth0.send_redirects = 0 [for IPv6]


发表评论

电子邮件地址不会被公开。 必填项已用*标注